| Firmware Version: | 1.1-2 19 Apr 2005 |
| Serial Number: | 4503243986 |
|---|
| Firmware Warranty Date: | 01 Jun 2006 |
|---|
Uploaded Firmware Files
Firmware file NetRS-1.1-2.ppc.rpm
This file is installable under the terms of your warranty.
Details:
Name : NetRS
Summary : Trimble NetRS Full Firmware Package, version 1.1-2
Version : 1.1-2
Build Date : Tue Apr 19 17:22:25 2005
License : (c)2005 Trimble Navigation Limited
Size : 11402320 bytes
This is a full release RPM package for a Trimble NetRS GPS receiver.
Firmware Version 1.1-2
Firmware Date 2004/11/04
To install this release use the NetRS Browser interface to upload
this file onto your NetRS. Then click the Install button. The
installation process will take several minutes.
Expected Installation Time : 400 seconds.
=====================================================
Trimble NetRS Firmware Version 1.12
=====================================================
- Fixed for memory corruption problems due to the real time
operating system extensions. Clears up various restarts and
hangups, during power-up.
- Cleaned up problem that generated messages in the log files
about wtmp file missing when ftp sessions were started.
- Cleaned up problem that generated messages in log files when
using Internet Explorer and Https protocol.
- Fixed problem with MTU changes not being accepted (and other
minor warning messages), due to a blank Ethernet Gateway
specification.
- Several reliability enhancements to handle occasional compact flash
card problems during boot cycles.
- Properly manage the /var/log/debug file which could grow without
bounds under some circumstances.
- Update a large number of online help files for clarity, to
include new features, etc.
======================================================================
Previous release notes
======================================================================
========================================
Trimble NetRS Firmware Version 1.11
========================================
Version 1.11 fixes several problems found in version 1.10 and adds
three new features.
- Fixed problem where Carrier Phase values grew too
large when clock steering was enabled.
- Fixed problem where GPS streaming system would
occasionally freeze and crash system, especially when system
activity page was being displayed while streaming lots of data.
- Fixed problem where I/O system could not keep up with
10Hz Binex streams.
- When generating Binex Record types 7f-03, and no
satellites are available, emit Record type 7f-04 instead of
nothing.
- Fixed problem with last 4 bytes of WAAS raw data in
RT-17 streams.
- Binex 7f03 carrier phase values are now rounded
before encoding to increase precision from 0.02mm to 0.01mm.
- Trimcom interface now includes command RESETRECV-58h
which allows triggering a system restart, and allows clearing
the almanac and ephemeris data.
- Trimcom interface is enhanced by allowing command
COMMOUT-49h to enable or disable the 1PPS output.
- Fixed two broken HTML links to the Security- Accounts
help page.
===================================
Trimble NetRS Firmware Version 1.10
===================================
New Features for NetRS Firmware Release Version 1.1-0
--------------------------------------------------------------
- Added Binex format for both logging and I/O streaming.
Supported record types: 0x7f-02, 0x7f-0x03, 0x00-0x04, 0x00-0x0f,
0x00-0x18, 0x00-0x1d, 0x00-0x1f, 0x7d-0x00.
- Added a UDP+retry streaming protocol with the new REP (Retry
Enhanced Protocol) stream, using an underlying SCTP protocol with
a History buffer. Supports streaming Binex format using REP.
- Added a Port Advertising function.
- Added a Client Authentication system for I/O streams.
- Added PPP Dialout capability using PAP/CHAP setup, with AirRaven
compatibility.
- Added enable/disable function for all Output Streams and PPP
connections.
- Added textual antenna serial number.
- Updated the list of supported antennas.
- Added secure HTTPS protocol interface for Browser and Programmatic
interfaces.
- Removed all previously defined external I/O ports which were for
internal use-only.
- Added IP packet Filtering based on packet source addresses.
- HTTP/HTTPS can be activated on alternate port numbers.
Standard ports for these services can also be disabled.
- FTP service can be shifted to an alternate port.
- Added new AutoDelete Pool system.
- Made Vsleep (software controlled shutdown) threshold adjustable.
- Added in Trimcomm support for getting Voltage & Temperature.
- Ethernet MTU parameter can now be adjusted.
Trimble NetRS Firmware Release Version 1.1-0 Base Features
----------------------------------------------------------
GPS Engine:
L1, L2, WAAS/EGNOS tracking and L2C.
Pulse per second timing output.
10 MHz external frequency input.
User selectable clock steering.
User selectable Everest multipath mitigation.
Data Logging:
Internal compact flash memory (supporting 256MB or 1GB cards).
T00 compressed format.
Binex format.
MET/Tilt data from external sensor logged to data files.
Configurable manual, daily, once only and continuous logging sessions.
Autodelete file management system.
Configurable power saving (auto shutdown) mode.
Streaming Output formats:
RT17 (Serial, TCP, UDP).
RTCM 2.x (Serial, TCP, UDP).
CMR/CMR+ (Serial, TCP, UDP).
Binex (Serial, TCP, UDP and REP).
MET/Tilt interface to external sensors (Serial).
Ephemeris data (TCP)
Almanac data (TCP)
SV status data (TCP)
Configuration:
HTTP/HTTPS interface for configuration through a web browser.
Programmatic Interface over HTTP/HTTPS ports.
Receiver configuration cloning.
Remote firmware upload and installation.
Networking:
Dynamic network configuration using DHCP protocol.
PPP Dialin protocol supported on serial ports.
PPP Dialout capabilities.
File transfer through HTTP and FTP.
NTP time service protocol.
Configurable alternate ports for HTTPS, HTTP, and FTP.
Port Advertising.
Security Features:
HTTPS with SSL certificate support.
Configurable security levels for HTTP/HTTPS and FTP access.
IP packet filtering based on packet source addresses.
Client stream authentication.
