ARSC T3E Users' Newsletter 151, September 18, 1998

Vis5D Class at ARSC

ARSC will run a training class on the use of the Vis5D package, on Wednesday, September 23, 1-4pm in room 007 of the Butrovich Building.

Vis5D is an interactive, general purpose software package for visualizing time varying, multidimensional data; it can be used on PCs, workstations or the ImmersaDesk. The class will cover (1) preparation of data sets, (2) the Vis5D user interface, and (3) strategies for using the package effectively.

The class is free, and open to any interested faculty, staff or students. Please register before Tuesday, September 22 by phoning 450-8602 or by sending e-mail to training@arsc.edu .

Programming Environment Upgraded at ARSC

The default PE on yukon has been upgraded to include:


  cf90      3.0.2.1.
  CC        3.0.2.2.
  craytools 3.0.2.3.
  craylibs  3.0.2.3.
  cam       2.3.0.1.
  CCmathlib 3.0.1.0.
  CCtoollib 3.0.1.0.
  mpt       1.2.0.2.
  cvt       3.1.0.0.

In case you would like to make more comparison tests, the previous environment is still available. Load it with the command:

module switch PrgEnv PrgEnv.old

(Note: the chilkoot PE has been similarly upgraded.)

High-Performance Fortran Compiler, pghpf, Upgraded at ARSC

Version 2.4.4 of the Portland Group's High Performance Fortran was made the default pghpf compiler during system downtime on 15 Sept 1998. As always, you may access the default version with the command:

module load pghpf

The previous version is still installed, and may be accessed with the command:

module load pghpf.2.3

or, if you have already loaded the default, with the command:

module switch pghpf pghpf.2.3

Documentation for pghpf 2.4 is available from ARSC's online document server at the address:

http://www.arsc.edu:40/docs/PGHPF/index.html

ARSC users, read news documents to get the login and password to this server.

Here is the "Summary of Changes" from the PGI documentation:

The following features have been added to PGHPF 2.4 since the prior 2.2 and 2.3 (CRAY T3E only) releases.

  • Support for HPF 2.0 semantics has been added under control of the -Mhpf2 command-line switch. This switch will become the default in a future release of PGHPF.
  • Support for the HPF 2.0 SHADOW directive.
  • Support for the HPF2.0 additional arguments to HPF_DISTRIBUTION(), and GLOBAL_DISTRIBUTION().
  • Fortran 90 POINTER mappings must conform to the TARGET mapping, as specified in HPF 2.0.
  • The REDUCTION clause is now supported on INDEPENDENT loops.
  • Internal procedures are now supported on systems using a Fortran 90 compiler as the native Fortran back-end (currently only CRAY platforms).
  • Recursion is now supported on systems using either a Fortran 90 compiler as the native Fortran back-end or a PGI-supplied native Fortran back-end (currently only CRAY, SPARC, and IA-32 platforms).
  • The graphical user interface (GUI) for PGPROF has been updated.
  • A new compiler switch, -Mbyteswapio, will cause bytes to be swapped from big-endian to little-endian format (or vice versa) on input/output of unformatted Fortran binary files. This allows IA-32 systems, for example, to read/write binary files produced on a big-endian IEEE format system (for example SGI or Sun).
  • The -Mf90 switch has been modified to interpret programs using Fortran 90 semantics.
  • The -Mserial switch has been modified to cause programs to compile in serial mode but using HPF semantics.
  • The -Mcraft switch is supported on the CRAY T3E to allow compilation of HPF_CRAFT programs and/or extrinsics. See the HPF_CRAFT User's Guide for more information on how to use this switch.
  • New switches, -Mtotalview and -Mtv, have been added to support compilation for debugging with TotalView.
  • Support has been added for PALLAS VAMPIR, a communications and performance profiling tool, using the -Mvampir switch.
  • A new runtime switch --pghpf -system_clock_rate allows the user to set the granularity of the clock used in the F90 SYSTEM_CLOCK intrinsic. By default, the granularity is 1000 ticks per second on all platforms other than Cray, which has a 64-bit timer. Most platforms support higher resolution, but implement the timer in only 32 bits. For example, a value of --pghpf -system_clock_rate 1000000 could be used to increase granularity to 1,000,000 ticks per second, but the clock would roll over after approximately 30 minutes on a system with 32-bit timer. A corresponding environment variable PGHPF_SYSTEM_CLOCK_RATE can be set to increase the granularity for all runs. This option is available to allow users to perform high resolution timings without sacrificing the occasional need to time computations that take hours or even days.

Most of these features are described in more detail either in the following sections or in the PGHPF Compiler User's Guide, which has been updated for release 2.4.

Arctic Research Award

[ We received the following announcement from the Arctic Research Consortium of the United States (ARCUS):

http://www.arcus.org/ .

ARCUS also has a list server, described at:

http://www.arcus.org/ArcticInfo/ArcticInfo.html . ]

> > The Third Annual ARCUS Award for Arctic Research Excellence > > In keeping with its mission to promote arctic research and education, the > Board of Directors of the Arctic Research Consortium of the United States > (ARCUS) proudly announces the Third Annual ARCUS Award for Arctic Research > Excellence competition. This year's student competition will be judged in > four broad categories: physical science, life science, social science, and > interdisciplinary research; with up to four awards given. Papers must be > submitted along with an entry form to an ARCUS representative by 5:00pm on > 1 December 1998. > > The review panel will include top arctic researchers from various fields. > The winners of the "award for excellence" will have the added experience of > presenting their work to a broad-based audience during the Arctic Forum, a > seminar on Arctic research during the ARCUS 11th Annual Meeting in > Washington, D.C. The winning student papers will be published on the ARCUS > World Wide Web site as well. > > We encourage you to spread the word about the Third Annual ARCUS Award > competition to students who may be interested in this opportunity to gain > national recognition, present their research at a significant assembly on > Arctic research, and receive a $500 dollar cash award. The text of the > announcement flyer follows this message. More information about the > competition, including the winners of last year's award and a graphical > downloadable copy of the flyer, can be found at > http://www.arcus.org/Award/Announcement.html. > >

[ ... lots of detail removed ... ]

Quick-Tip Q & A


A: {{ The high-performance fortran compiler, pghpf, exists on this T3E... 
      Isn't there a man page?  }}

  To access the pghpf compiler AND man page, you must load the module:
  
    yukon% module load pghpf



Q: The Unix "sort" command sorts multiple lines.  Can you sort words 
   on a single line?  You might want, for instance, to sort the output 
   of the "groups" command.

[ Answers, questions, and tips graciously accepted. ]


Current Editors:
Ed Kornkven ARSC HPC Specialist ph: 907-450-8669
Kate Hedstrom ARSC Oceanographic Specialist ph: 907-450-8678
Arctic Region Supercomputing Center
University of Alaska Fairbanks
PO Box 756020
Fairbanks AK 99775-6020
E-mail Subscriptions: Archives:
    Back issues of the ASCII e-mail edition of the ARSC T3D/T3E/HPC Users' Newsletter are available by request. Please contact the editors.
Back to Top